Connect Valor VL100 and VL110 to Wifi or Hotspot

To connect a Valor VL100 to Wi-Fi, follow these steps:

1. Unplug Ethernet cord
2. Press The Icon on Bottom of Screen (looks like a hamburger)
3. Down Arrow
4. Utility
5. Enter Password (last 4 of EPI)
6. Comm Config
7. Config
8. Comm Config
9. Press 2 (Wi-Fi)
10. Select Your Network
11. Enter Network Password
12. Select OK
13. Terminal Connects to Network

Test the connection by following the previous steps and select Ping at Step 7.

For a phone hotspot you will need to enable the hotspot feature on the phone, setup a password(if you haven’t already) and select the hotspot in the wifi options.